 |
 |
 |
|
| Configurations |
Infinite Combination of Moving and Fixed Panels |
| Glass Thickness |
3/16”, 1/4” or 5/8” |
| Muntin |
Profile Extruded
Interior and Exterior |
| Frame Color |
White,Bronze |
|
|
|
 |
Sliding glass doors shall be of series 410, 430, 450 or 470 as manufactured by Lawson Industries, Inc., Medley, Florida, USA.
|
|
All door members shall be of commercial quality 6063 aluminum alloy to T5 and T6 temper. Door stiles shall be notched to allow top and bottom rails to telescope into stiles for maximum strength. Locking and fixed stiles to be of tubular design with minimum dimension of 1”x 1”. Tracks shall be of sloped exterior design with a
1 3/4” vertical riser as standard. Optional tracks with various vertical risers shall be available for conditions requiring higher positive pressures. Top of vertical door stiles shall be joined to horizontal rails using two #10 x 3/4”sheet metal screws. Bottom door rails shall be joined to stile using one #10 x 3/4”sheet metal screw.
|
|
Doors, jambs and headers shall receive an
electrostatically applied 1.0 mil dry fill thickness coating which meets the performance requirements of A.A.M.A. 603.5 in a choice of bronze or white. All tracks and thresholds shall be finished.
|
|
Latches shall be flush-mounted in white or black pained finishes with integral interior and exterior recessed, matching pulls. An “On-Off” switch-type “Night Lock” shall maintain the doorbolt in locked position. Latches shall include a high quality 5-disk keylock to actuate the lock from the outside (added option). Keylocks may be keyed alike or master keyed on special order at additional cost.
|
|
When specified, muntins shall be 1 1/8”-wide
aluminum extrusion applied to interior, exterior
or both sides of door panel.
|
|
Double weather stripping throughout unit shall be water-resistant polypropylene pile and virgin PVC vinyl.
|
|
Vertical and horizontal members shall be tubular sections with spring-loaded rollers in identical top and bottom rails for easy reversing. Positive action screen latch shall be self-reversing. All corners are joined using 2 #8 x 1 1/2” sheet metal screws. A box screen using door panels shall be available as an added option.
|
|
Double weather stripping throughout unit shall be water-resistant polypropylene pile and virgin PVC vinyl.
|
|
Doors shall be glazed using 3/16”, 1/4” or
tempered 5/8” insulated glass.
|
|
Doors shall be glazed using 3/16”, 1/4” or
tempered 5/8” insulated glass.
|
| |
|
|
|
Die-cast latch for added security and ease of operation.
Modular size conforms to the industry’s most commonly
built openings and makes replacement of existing doors fast and easy.
Steel rollers allow door panels to move smoothly. Stainless
steel added option is available.
Heavy duty screen with tubular extruded stiles and rails resist
bowing.
Multiple panel configurations: Most moving or fixed panels
are available.
Custom sizes mean that units may be cut down in height and
width as an added option.
Colonial design aluminum muntins on exterior and interior
are an added option.
Interior door installation shall be installed using a flat
sill without interior door riser.
|
|
|
